IBM 3745 Problem Determination Manual page 349

Wrap Test
11
While the wrap test is in progress, the next screen is displayed.
Wait until the test is complete then go to steps 12, 13, and 14 for results analysis.
Do not press
§B
Note: Refer to your console documentation to identify the BREAK key.
For "instance, the BREAK key may be:
A combination of SEL.FUNCT and PAUSE (on 316x consoles).
- The ATTN key.
--------------------------------------------------------------------------------- m ml ddlyy h h: m m
FUNCTION ON SCREEN: WRAP TEST
WRAP TEST IN PROGRESS
LINE ADDRESS: 0
LCD 9: SOLC
TYPE: CNTRL LEVEL: MODEM
CNTRL PGM: NCP LlC TYPE: 3
- PRESS BREAK IF YOU WANT TO STOP WRAP
===>
Fl:END F2:MENU2 F3:ALARM
16:-6
IBM 3745 Communication Controller: Problem Determination Guide
c
(