IBM 3745 Problem Determination Manual page 302

o
o
o
o
o
MASTER ONLY
Cause: The LLAP is being attempted from local secondary or tributary LlCS.
Action:
• If
at the remote side, the control (or primary) point is:
A LlCS, ask the remote operator to run LLAP.
Another equipment, ask the remote operator to execute a similar problem determination
procedure or to check the remote equipment.
NETW SERVICE OFF
Cause: Network services option not ON ..
Action:
• Enable network services in local modem configuration.
• Press the EXIT key to return to the background display.
NO LOC DTE ACTIV
Cause:
There has been no data transmission during the last 15 minutes.
Action:
• Try automatic problem determination again during normal data transmission.
• Contact the host operator to check that the line is activated.
• Press the EXIT key to return to the background display.
REM MODEM ERROR
Cause: Faulty remote modem
Action:
• Ask the remote operator to perform the remote modem wrap test with a telecommunication
wrap plug at the telephone company end.
• Replace the remote modem if necessary.
• ·Press the EXIT key to return to the background display.
REMOTE PROBLEM
Cause: Faulty remote modem or remote OTE.
Action:
• Ask the remote operator to perform the remote modem wrap test with a telecommunication
wrap plug at the telephone company end.
• Press the EXIT key to return to the background display.
Chapter 9. LlC and Line Problems (LSS)
9-51