IBM 3745 Problem Determination Manual page 246

o
o
o
o
o
Remote Loadingl Activation Problems and Messages
Below is a list of messages that can be displayed at the MOSS console when using the remote
loading/activation procedure (diskette management option of the MOSS 011 function).
Refer to "Remote Loading/Activation Overview" on page 8-10 for an overview of the procedure.
DISKETTE BADLY INITIALIZED
Cause: Depending on the microcode level, this message may be replaced by the following one:
DISKETTE UNFORMATTED.
Action: See DISKETTE UNFORMATTED.
DISKETTE UNFORMATTED
Cause: The diskette is not formatted.
Action: Select the DIF function to format the diskette.
FILE NOT AVAILABLE ON DISK
Cause:
• The file is already opened, a disk operation is going on.
• You specified a wrong load module name.
Action: Restart the operation later.
FILE NOT AVAILABLE ON DISKETTE
Cause: There is no load module on the diskette.
Action: Replace, or generate another diskette.
LOAD IN PROGRESS, FUNCTION NOT AVAILABLE
. Cause:
• A lo·ad module is being transferred onto the disk (issued by an MLM command from the
host).
Action: Wait for the end of the current operation and restart the function. Refer to the 011
function in the 3745 Advanced Operations Guide.
LOAD MODULE TOO BIG, CANNOT BE COPIED TO DISKETTE
Cause: The load module is greater than 1 Megabyte.
Action: Generate a smaller load module.
Chapter 8. IPL Problems (From Host or Disk)
8-11