Oil Level Sender; Lh Control Assembly; Auxiliary Stop Switch - Polaris 600 RUSH 2010 Manual

Table of Contents

Oil Level Sender

To test the oil level sender, position the sender as it would

be in the oil tank. Allow the float to drop in the direction it

would if the oil tank were empty. Continuity should be

present when using a multimeter to test the sender with

the float in the "empty" position.

No continuity should be present when the float is moved

away from the "empty" position.

Test the left hand (LH) control assembly using a

multimeter set to show continuity. Reference the

illustration below for continuity checks.

The auxiliary stop switch is a hard stop switch and will

shut off the engine when pushed down.

There are two switch types used on PRO-RIDE

snowmobiles, but both types function the same. Type one

switches are integrated into the right hand throttle block.

Type two switches are snapped into a bracket which is

secured directly to the handlebar tube.

EMPTY (CONTINUITY)

Battery and Electrical Systems

Stop Switch Continuity

TYPE 2 SWITCH

Table of Contents