Left Bulkhead Clip Removal - Polaris 600 RUSH 2010 Manual

Left Bulkhead Clip Removal

1. Remove the following components:
• Right/left engine compartment door
• Hood
• Nosepan/bumper
• Exhaust pipe/silencer
• Oil tank/clutch cover assembly
• Airbox assembly
• Engine assembly
• Left-side front engine mount
• Bulkhead floor plate
• Left side front suspension components
• Lower steering arm
• Fuel tank (Remove fuel hoses and gasoline from
tank)
2. Drill out the rivets securing the left fender to the
bulkhead and chassis.
3. Remove the five fasteners and nuts (including the two
engine mount fasteners/nuts) securing the bulkhead
clip to the left side engine side support brace.
4. Remove the bulkhead clip fasteners/nuts.
LOWER HEAT EXCHANGER MOUNT
5. Remove the cross shaft fastener from the bulk head
clip.
Chassis
9
9.31