Table of Contents
Advertisement
Progressive 136 Rail Assembly
INSIDE OF RAIL
RAIL BUMPER
BUMPER LINER
C
RAIL TIP
B
BOGIE WHEEL MOUNT
A: 7.4 ft-lbs (10 Nm)
B: 4 ft-lbs (5.4 Nm)
C: Torque nut until screw protrudes 5mm
D: 17 ft-lbs (23 Nm)
E: 33 ft-lbs (45 Nm)
Assembly Notes
• Never re-use lock nuts. Always replace with new
parts.
• All pivots must rotate freely after tightening
fasteners.
CAUTION
Some rail shaft fasteners are pre-coated with locking
agent. Never re-use these fasteners once removed.
Always use new pre-coated fasteners.
SUPPORT PLATE
D
RAIL SLIDER
A
= T
Steering and Suspensions
SPACER
TRACK TENSIONER BLOCK
BOGIE WHEEL ASM.
D
E
METRIC FASTENERS
8
8.53
Advertisement
Chapters
Table of Contents
Troubleshooting
