Steering and Suspensions
RMK COIL-OVER REAR SUSPENSION
Suspension Adjustments
The primary tuning component on all RMK coil-over rear
suspensions is the rear track shock spring installed length.
(Measure spring length with suspension off the ground.)
RIDER WEIGHT
(
WITH GEAR
LBS.
<160
160-220
220-280
280-340
NOTE: BOLD/SHADED CELLS = FACTORY SETTING.
CAUTION
CAUTION: Do not adjust STANDARD spring length
greater than (>) or less than (<):
RMK = >10 3/4" or <9 5/8"
PRO RMK = >11" or <9 3/4"
RMK Assault = >11" or <9 3/8"
RMK Coil-Over Standard Springs
• RMK = 7043680-133 (210 Rate)
• PRO RMK = 7043714-133 (210 Rate)
• RMK Assault = 7043572-133 (190 Rate)
8.78
RTSS Setup-Standard Spring
)
KG
PRO RMK 155/163
<73
73-100
PRO RMK 155/163
PRO RMK 155/163
100-127
PRO RMK 155/163
127-154
All RMK coil-over rear suspensions are manufactured with
STANDARD
accommodate rider weights (with gear) up to
340 lbs. (154kg).
Initially, the rear track shock spring should be set to the
rider's weight (with gear). Reference the Rear Track
Shock Spring (RTSS) Setup Table below.
MODEL
RMK
RMK ASSAULT
RMK
RMK ASSAULT
RMK
RMK ASSAULT
RMK
RMK ASSAULT
rear
track
shock
springs
INSTALLED SPRING LENGTH
(
REAR SUSPENSION OFF THE GROUND
INCHES
10 3/4
10 7/8
10 1/4
10 3/8
10 1/4
10 1/8
10
9 3/4
9 1/2
that
will
)
CM
27.3
27.6
26
26.3
26
25.7
25.4
24.8
24.1