2011 800 Engine Mounting - Polaris 600 RUSH 2010 Manual

Engine/Cooling/Exhaust

2011 800 Engine Mounting

RADIAL INSERT (LARGE)
A
RADIAL INSERT (LARGE)
MOUNT BRACKET
C
NOTE: SEE ENGINE MOUNT BOLT SERVICE REPLACEMENT KIT
A = 35 ft-lbs (48 Nm) Apply Loctite® 242™ to
threads.
B = 9 ft-lbs (12 Nm)
C = 26 ft-lbs (35 Nm)
D = 18 ft-lbs (24 Nm)
E = 30 ft-lbs (41 Nm) Apply Loctite® 242™ to
threads.
3.18
ENGINE ASSEMBLY
MOUNT BRACKET
A
C
MOUNT
C
C
B
MOUNT
E
= T
B
ENGINE MOUNTS
A
E
MOUNT W/CLINCH NUT (PTO-SMALL)
E
E
Assembly Notes:
• ENGINE MOUNT BOLTS-Always clean engine
mount strap threads with compressed air or
M10x1.5 tap before installing screw(s). Apply
Loctite® 243™ when using original bolt.
• To prevent the engine mount bolts from catching
on the radial inserts, spray the inserts with rubber
lubricant or isopropyl before installing engine
mount fasteners.
• Replace lock nuts with new parts when removed.
C
TORQUE LINK INNER
BRACKET
D
TORQUE LINK OUTER
BRACKET
TORQUE LINK
E(NO Loctite®)
TORQUE LINK MOUNT
MOUNT W/CLINCH NUT
RADIAL INSERT (LARGE)
B
A
B
RADIAL INSERT (SMALL)
C