Dc-Cfi-2 Fuel Injectors/Fuel Rail; Fuel Injectors/Assembly - Polaris 600 RUSH 2010 Manual

DC-CFI-2 FUEL INJECTORS/FUEL
RAIL

Fuel Injectors/Assembly

DC-CFI-2 engines feature a dual fuel injector/wiring
harness assembly. Fuel injector replacement requires
removing both fuel injectors/harness and installing a new
assembly. Fuel injectors are not supplied individually.
Harness cutting and splicing is not required.
CAUTION
2011 fuel injectors are different and not interchangeable
with other model years. Severe engine damage will
occur if the incorrect fuel injectors are installed.
O-RINGS (7.52MM ID)
ISOLATOR O-RING (12.4MM ID)
2011 FUEL INJECTORS w/HARNESS
O-RING (BLACK)
O-RING (BROWN)
GREEN BUSHING
2012-2013 FUEL INJECTORS w/HARNESS
Cleanfire Fuel Injection
NOTE: In addition to the fuel injector o-rings, an
isolator o-ring (2011) or bushing is installed inside
each cylinder fuel injector bore.
To obtain the correct fuel injector set for the vehicle,
always reference the model-specific parts manual when
ordering a new fuel injector set. Note that fuel injector color
code may not match the fuel injector set original installed
on the engine.
CAUTION
Always verify the fuel injector color code with the fuel
calibration map loaded on the ECU.
Severe engine damage may occur if the incorrect fuel
injector calibration is loaded on the ECU.
4
4.23