Digital Wrench® Serial Number Location; Digital Wrench® Version And Update Id; Digital Wrench® Updates - Polaris 600 RUSH 2010 Manual

Cleanfire Fuel Injection
NOTE: Connecting the chassis power-up harness to
the DC POWER TEST plug will power the DC chassis
circuit.
CAUTION
Do not connect DC power to the AC power test plug. This
plug is for testing the AC power circuit with a digital volt/
ohm meter. Severe electrical system damage will occur.
Digital Wrench® Serial Number Location
Open the configuration screen by clicking on the wrench
icon. The serial number is located on the right side of the
screen.
Digital Wrench® Version and Update ID
Knowing what Digital Wrench® version and update is
installed will help determine which updates are required.
NOTE: Versions and updates are subject to change.
1. Open the Digital Wrench® software. Locate the
version ID shown on the lower right side of the Digital
Wrench® start-up screen.
4.36
2. Proceed to http://polaris.diagsys.com to see if a
newer update is available.
3. If a newer update is available, it should be
downloaded before using Digital Wrench® (see
"Digital Wrench® Updates").
Digital Wrench® Updates
Updates are released for Digital Wrench® via the Internet
at: http://polaris.diagsys.com. The Digital Wrench®
web site can also be accessed through the dealer web site
at: www.polarisdealers.com.
NOTE: Only
distributors can access the dealer web site.
1. Log on to www.polarisdealers.com.
2. Locate the "Service and Warranty" drop-down
menu.
3. Click on "Digital Wrench® Updates".
Version
4. The Digital Wrench® portal web site should appear in
a new web browser.
Digital Wrench® Update
authorized Polaris dealers and