Polaris 600 RUSH 2010 Manual page 129

2012-2013 600/800 Engine Mounting
RADIAL INSERT (LARGE)
A
RADIAL INSERT (LARGE)
MOUNT BRACKET
C
A = 40 ft-lbs (54 Nm) Apply Loctite® 243™ to
threads.
B = 9 ft-lbs (12 Nm)
C = 26 ft-lbs (35 Nm)
D = 18 ft-lbs (24 Nm)
E = 30 ft-lbs (41 Nm) Apply Loctite® 242™ to
threads.
ENGINE ASSEMBLY
MOUNT BRACKET
A
C
MOUNT
C
C
B
MOUNT
E
= T
Engine/Cooling/Exhaust
TORQUE LINK MOUNT
B
ENGINE MOUNTS
A
E
RADIAL INSERT (SMALL)
MOUNT W/CLINCH NUT (PTO-SMALL)
E
E
Assembly Notes:
• ENGINE MOUNT BOLTS-Always clean engine
mount strap threads with compressed air or
M10x1.5 tap before installing screw(s). Apply
Loctite® 243™ when using original bolt.
• To prevent the engine mount bolts from catching
on the radial inserts, spray the inserts with rubber
lubricant or isopropyl before installing engine
mount fasteners.
• Replace lock nuts with new parts when removed.
TORQUE LINK INNER
BRACKET
D
TORQUE LINK OUTER
BRACKET
TORQUE LINK
E(NO Loctite®)
MOUNT W/CLINCH NUT
RADIAL INSERT (LARGE)
A B
B
3
C
3.19