Polaris 600 RUSH 2010 Manual page 384

Steering and Suspensions
2011-2013 RMK/2011-2012 PRO RMK 155/163
Pivots/Rear Idler
B
A
SHOCK SHAFT
LIMITER STRAP SHAFT
A: 33 ft-lbs (44.7 Nm) - Apply Loctite® 262™
B: 46 ft-lbs (63 Nm)
C: 33 ft-lbs (44.7 Nm)
D: 6 ft-lbs (8 Nm)
This suspension used on:
• 2011-2013 155/163 Base RMKs
• 2011-2013 RMK Assault
• 2011-2012 155/163 PRO RMKs
Assembly Notes
• Never re-use lock nuts. Always replace with new
parts.
8.64
REAR PIVOT
C
C
C
RMK ASSAULT ONLY
SPACERS (FLAT SIDE UP)
WASHERS
A
= T
IDLER SPACER
WASHER
C
C
BRACE SHAFT
D
B
• All pivots must rotate freely after tightening
fasteners.
Some rail shaft fasteners are pre-coated with locking
agent. Never re-use these fasteners once removed.
Always use new pre-coated fasteners.
WASHER
IDLER WHEEL
SPACER
INNER SHAFT
IDLER SPACER
WASHER
C
INNER SHAFT
C
METRIC FASTENERS
CAUTION
WASHER
C