Rmk144/Switchback Assault Rail Assembly - Polaris 600 RUSH 2010 Manual

RMK144/Switchback Assault Rail Assembly

INSIDE OF RAIL
RAIL BUMPER
BUMPER INSERT
B
RAIL TIP
STANDARD FASTENERS
A: 3-6 ft-lbs (4-8 Nm)
B: 4 ft-lbs (5.4 Nm)
C: Torque nut until screw protrudes 7/32" (5.3mm)
D: 19 ft-lbs (25 Nm)
E: 35 ft-lbs (47 Nm)
Assembly Notes
• Never re-use lock nuts. Always replace with new
parts.
• All pivots must rotate freely after tightening
fasteners.
CAUTION
Some rail shaft fasteners are pre-coated with locking
agent. Never re-use these fasteners once removed.
Always use new pre-coated fasteners.
C
RMK 144 ONLY
D
C
RAIL SLIDER
A
= T
Steering and Suspensions
JAM NUT
RAIL BUMPER
A
A
D
D
RAIL BRACE
SPRING GUIDE
BOGIE WHEEL MOUNT
D
TENSIONER BLOCK
E
SWITCHBACK ASSAULT ONLY
BOGIE WHEEL ASM.
DOMED WASHER
8.61
8