12.1 Overview
The Restore to default screen allows you to reset your device settings back to the factory default.
12.2 Restore
Click Maintenance > Restore to default. Information related to restoring configuration appears on this
screen, as shown below.
Figure 22 Maintenance > Restore to default
Back to Factory Default Settings
Click the Reset button to clear all user-entered configuration information and return the Zyxel Device to
its factory defaults. The following warning screen appears.
Figure 23 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your Zyxel Device.
Refer to
Section 1.4.4 on page 12
12.3 Reboot
System restart allows you to reboot the Zyxel Device remotely without turning the power off. You may
need to do this if the Zyxel Device hangs, for example.
Restore/Reboot
for more information on the RESET button.
PM7516-R0 / PM7116-R0 User's Guide
35
C
H A P T E R
12