Calibrate For Paper - Tektronix Phaser 750 User Manual

Adjusting Color Density
Calibrate Colors menu selections
Menu item*
Adjust <color>:
<---- ----> Menu
Adjust <color>:+0 *
<---- ----> OK
Reset adjustments
<---- ----> Menu
*
An asterisk ( ) indicates the current setting.
*

Calibrate for Paper

From the front panel:
1.
Press Help; and scroll to Print Quality.
2.
Press Menu; and scroll to Calibrate for Paper.
3.
Press Menu; scroll to Printer Displays Reference Pages, and print this material.
There are eleven reference pages for you to calibrate the specific paper you use. Follow the
instructions on the page that matches your paper and adjust the Transfer Setting.
I
Use Tektronix brand media for best print quality.
I
Best results are achieved when relative humidity is below 30 percent.
I
Print quality may not be improved on some laser paper.
I
Calibrate for paper changes will only effect Standard and Enhanced print quality
modes from the paper trays, not the Multi-Purpose Tray.
108
What it does
Enters the menu to calibrate a single
color.
Calibrates the indicated color.
Resets the color calibration to the
default settings.
How it works
Press Menu.
I
To lighten this color
I
toner, press <-- (the
number decreases in
1-point steps); then press
OK.
To darken this color
I
toner, press --> (the
number increases in
1-point steps); then press
OK.
Press Menu; then press
I
Confirm.
Phaser 750 Color Printer