Driver Settings
Changing the data format used by the driver affects print speed in different operating
systems:
Macintosh: the driver defaults to binary data. This is recommended.
I
Windows 95/Windows 98: Under the Set Up tab, click Expert Options, then click
I
PostScript. Check Printer Properties. Put a check in the Use Automatic Data
Format box. This selects the correct data format for the connection method.
Windows NT 4.x: In Printer Properties, click the Device Settings tab. Locate the
I
Output Protocol and type Binary for network connections. If connected via
parallel, change from ASCII to BCP.
Windows 2000: Under the Tektronix Features tab, which is available from the
I
File Print Dialog or Print Manager Printer Properties, check Printer Properties.
If printing is slow, refer to the TekSMART knowledge base for solutions:
www2.tek.com/TekSMART/
1.
In the Go to a specific document number field, enter the number 37185 and click Go.
2.
A solution for Slow Printing, Print Time Too Long is resolved in the article, Items to
Check for Slow Printing Issues.
Advanced Features and Troubleshooting Manual
Troubleshooting Phaser 750 Printers
139