Adjusting margins
This printer provides a front-panel interface to adjust the page margins:
I
Single-sided print
Automatically prints when the printer has one tray only.
I
I
Duplex (Double-sided print)
Requires the Automatic Duplex/Lower Tray Assembly.
I
Duplex Unit must be installed in the upper tray slot.
I
In the front panel's Printer Defaults menu, Duplex mode must be enabled.
I
Adjusting margins for a single-sided print
You might want to adjust the margins on a single-sided page if the image area is not
centered on the page. In other words, the margins are not even, relative to the outside edge
of the paper.
1.
In the front panel's Printer Settings menu, set the Duplex mode to Disable.
2.
Print the Margin Adjust page from the front panel.
a.
Press Help.
b.
Scroll to Print Quality; and press Menu.
c.
Scroll to Calibrate Margins, press Menu, the display reads:
d.
Press Print.
3.
Determine if the margins need adjustment: use the page's top- and left-margin gauges
to note how much the margins are off-center.
Advanced Features and Troubleshooting Manual
Advanced Printing Features for Phaser 750 Printers
Calibration Page
<---
--->
Print
0236-63
103