Manual 2-Sided Printing From The Multi-Purpose Tray - Tektronix Phaser 750 User Manual

Manual 2-Sided Printing From the
Multi-Purpose Tray
Side 1
Caution
Use only laser bond paper for the automatic two-sided
printing in the paper trays. The Multi-Purpose tray should be
used for manual two-sided printing on Tektronix Premium
Color Printing Paper, Tektronix Glossy Coated Paper, or
Heavy Paper. Two-sided printing on specialty media can
shorten component life. For opacity and feed reliability, use
laser paper that is 90 g/m
not use heavy toner coverage on Side 1 of a manual 2-Sided
Print; also, increase the top margin on Side 1 to at least
12mm (or .5 in.).
I For a multi-page document, print odd-numbered pages for Side 1.
(This selection is application-specific).
1.
Set the media thickness switch; refer to page 25 for the correct
setting.
User Guide
2
(24 lb. bond). For best results, do
43