Print Quality Hints - Tektronix Phaser 750 User Manual

Troubleshooting Phaser 750 Printers

Print quality hints

To ensure the best print quality and the most reliable printer operation, follow these
simple guidelines:
I Use high-quality paper and only Tektronix transparencies and glossy coated paper.
I Do not use any media designed for inkjet printers, especially inkjet coated paper and
inkjet transparencies. Inkjet media are coated with a substance that may damage the
Fuser; Tektronix does not furnish warranty service for damage or malfunction caused
by the use of non-Tektronix supplies or consumables. Tektronix coated paper and
transparencies have been specially designed for use with Tektronix Color Laser
Printers.
I
Double-sided printing and specialty media will require more frequent cleaning of the
rollers and will reduce the average life of the consumables.
I Auto-duplex only with laser bond paper that is 75 - 90 g/m
paper that is lighter than 75 g/m
duplex prints.
I
Use only laser paper for automatic double-sided printing with the Duplex Unit.
I Keep the Imaging Unit's light exposure to a minimum — less than 90 seconds of
artificial light and no exposure to sunlight — or you may damage the unit:
When installing a new Imaging Unit, keep the protective plastic sheet on until
I
immediately before inserting the unit.
If, when installing the Imaging Unit, you also need to install other components,
I
install the Imaging Unit last to minimize its light exposure.
When changing a Toner Cartridge or clearing a media jam, make sure that you
I
close the printer's right side door quickly to avoid any light exposure to the
Imaging Unit.
Do not leave the printer's front door open for extended periods of time (for
I
example, several hours).
Do not touch the underside or the right side of the Imaging Unit; fingerprints may
I
appear on your output.
136
2
(20 lb.); it is not opaque enough for acceptable
2
(20 - 24 lb.). Do not use
Phaser 750 Color Printer