Automatic 2-Sided Printing - Tektronix Phaser 750 User Manual

Automatic 2-Sided Printing

Caution
Never put media in the Duplex Unit; the printer reports a
media jam.
Use only laser bond paper for automatic two-sided printing
in the paper tray. Do not use any special media (glossy coated
paper) to print automatic two-sided printing. Two-sided
printing can be done manually; refer to Manual 2-Sided
Printing From the Multi-Purpose Tray on page 43.
Automatic two-sided printing requires that the Lower Tray Assembly
be installed.
1.
Make sure that the Duplex Unit is inserted in the printer's upper
(a) slot.
2
2.
Load 75 - 90 g/m (20 - 24 lb.) paper in the paper tray.
If you are using pre-printed paper, such as letterhead:
a.
Place the first side to be printed face-down.
User Guide
a
b
x
p le
D u r
pe
Pa
c
e r
e tt
A /L r
pe
Pa
l
g a
L e r
pe
Pa
0632-27
39