Tektronix Phaser 750 User Manual page 53

Solution:
1.
Choice of media; check the following:
Use Tektronix media.
I
Use the correct media tray for the media you are using.
I
When using the Multi-Purpose Tray, select the correct media
I
in the front panel.
2.
Relative humidity may be too low (below 30 percent relative
humidity).
I Refer to Calibrate for Paper in the printer's front panel and run
this mode:
Press Help, scroll to Print Quality, press Menu, scroll to
I
Calibrate for Paper, press Menu, print the references pages.
Follow the instructions on these pages and adjust the transfer
setting.
3.
Replace imaging unit or transfer kit.
User Guide
53