Tektronix Phaser 750 User Manual page 149

Error User Corrective Action
Error 52 Remove the Duplex Unit (if installed).
I
Check for paper under the Upper Tray.
I
Turn power off, then on.
I
Error 53 Open left door and remove any jammed media.
I
Tun the printer off, then on.
I
Error 60 Remove the media from the Multi-Purpose Tray. Turn the printer off, then on.
I
Reinstall the media. Make sure you do not overfill the tray.
I
Error 61 Remove and re-install each Toner Cartridge. Turn the printer off, then on.
I
Replace each Toner Cartridge. Turn the printer off, then on.
I
Error 62 Check for jammed paper throughout the paper path (especially in the paper
I
feeder and Fuser).
Remove and re-install the Fuser. Turn the printer off, then on.
I
Slide out and re-insert the paper feeder. Turn the printer off, then on.
I
Replace the Fuser. Turn the printer off, then on.
I
Error 63 Remove and re-install the Imaging Unit. Turn the printer off, then on.
I
Replace the Imaging Unit. Turn the printer off, then on.
I
Error 70, 71, Turn the printer off, then on.
I
and 72
Error 73 Remove and re-install the Imaging Unit. Turn the printer off, then on.
I
Replace the Imaging Unit. Turn the printer off, then on.
I
Error 74 Remove and re-install the Fuser. Turn the printer off, then on.
I
Replace the Fuser. Turn the printer off, then on.
I
Error 80, 81, Make sure that all four toner cartridges are installed in the printer.
I
82, 83, and 84
Turn the printer off, then on.
I
Error 01p Make sure that installed memory DIMM(s) are compatible with printer's image
I
processor board and that they are installed in the proper slot(s).
through
Error 47p
Advanced Features and Troubleshooting Manual
Troubleshooting Phaser 750 Printers
149