Tektronix Phaser 750 User Manual page 132

Troubleshooting Phaser 750 Printers
2.
A list of solutions for solving TCP/IP problems dealing with pinging another
computer and timeout issues appears. Most common TCP/IP problems can be
resolved in the article Verifying TCP/IP communications by pinging.
If the communication link between your computer and the printer is
I
working, the printer ejects a blank page. If this occurs, but you cannot
print from your application or through Windows, make sure that the
appropriate driver is installed and that you have selected the printer
correctly.
Printer doesn't appear in the Chooser (Macintosh)
I Make sure that the printer is turned on and the cables are correctly attached.
I Check the termination (refer to the documentation for your network adapter or
connector for information on termination).
I If you have changed the printer's name, make sure that you have given it a unique
name (not the same as any other printer in the zone or on the network).
I Make sure that the correct network is selected in either the Network or AppleTalk
Control Panel.
If the printer does not appear in the Macintosh chooser, refer to the TekSMART knowledge
base for solutions: www2.tek.com/TekSMART/
1.
In the Go to a specific document number field, enter the number 2889 and click Go.
2.
A list of solutions for connecting The Printer does not Appear in the Chooser's Select
a PostScript Printer Window Macintosh appears.
3.
If you need assistance with connection methods, refer again to the TekSMART
knowledge base. In the Go to a specific document number field, enter 2562 and click
Go.
4. A list of solutions is shown for Connecting a Tektronix Phaser Printer to a Macintosh
Directly via Ethernet.
132 Phaser 750 Color Printer