Tektronix Phaser 750 User Manual page 107

5.
After changing the density setting for any or all colors, reprint the Color Reference
Page:
The dashed line reflects the new settings.
I
In this example, the density for each color is set to a different value.
I
This table shows the selections available in the Calibrate Colors menu.
Calibrate Colors menu selections
Menu item*
Adjust light/dark
<---- ----> Menu
Lighter/Darker:+0 *
<---- ----> OK
Adjust each color
<---- ----> Menu
Color Reference Page
<---- ----> Print
Advanced Features and Troubleshooting Manual
Color Reference Page
Cyan
-4
-2
0 -9
+2 -7
+4
-5
+6 -3
+8 -1
+10 +1
+3
+5
+7
What it does
Lightens or darkens all toner colors.
For best results adjust each color
individually in the Adjust each color
menu.
Lightens or darkens all toner colors.
The current Light/Dark setting reflects
the average value of the four separate
density settings. Each increase adjusts
all four density values up or down the
same amount. The available
adjustment range is limited so that no
single color exceeds the ±10 value
limit.
Controls the color density for each
color independently.
Prints a sample of the current density
settings and a range of settings for each
color.
Adjusting Color Density
Magenta Yellow Black
-6
-4 -9
-2 -7
0 -5
+2 -3
+4 -1
+6 +1
+8 +3
+10 +5
+7
+9
9698-18.color
How it works
Press Menu.
I
To lighten colors, press
I
<-- (the number
decreases in 1-point
steps); then press OK.
To darken colors, press
I
--> (the number
increases in 1-point
steps); then press OK.
Press Menu.
I
Press Print.
I
107