Tektronix Phaser 750 User Manual page 134

Troubleshooting Phaser 750 Printers
Media frequently wraps around the Fuser
I Use Tektronix media for best results.
I Do not use any media designed for inkjet printers, especially inkjet coated paper and
inkjet transparencies. Inkjet media are coated with a substance that may damage the
Fuser; Tektronix does not furnish service for damage or malfunction caused by the
use of non-Tektronix supplies or consumables. Tektronix coated paper and
transparencies have been specially designed for use with Tektronix Color Laser
Printers.
I Make sure that you use a high-quality laser paper: 60 - 90 g/m
the media trays and 75 - 150 g/m
Tray.
I Replace the Fuser Roll.
Off-set images
I
Check your application for correct image sizing.
Cut-off images
I
Check your application for image sizing.
I
Make sure that you are using the correct PPD file and have selected the correct
page size.
I Make sure that the correct size media is in the media tray.
134
2
(20 - 40 lb. Bond) paper with the Multi-Purpose
2
(16 - 24 lb.) paper in
Phaser 750 Color Printer