Enabling The Postscript Error Report - Tektronix Phaser 750 User Manual

Enabling the PostScript error report

The error handling utility helps diagnose problems when a job doesn't print; it provides a
PostScript error-handling function to help determine the cause of some PostScript printing
problems. When the error handler is enabled, PostScript errors and other status
information are printed. This utility is useful for debugging PostScript code.
1.
In the printer's front panel, press Help.
2. Press <---- or ----> until the front panel displays this message:
3.
Press Menu.
4.
Scroll to this message:
5.
Press Menu; this message appears:
The * indicates the current selection; disabled is the factory default.
6.
Scroll to On.
7.
Press Ok.
8.
Press until the front panel reads Ready.
After turning on the error handler, resend the print job; the printer produces an error page.
Note
Windows 95/Windows 98 Microsoft Driver users: The Windows error handler
overrides the front panel error handler. To use the front panel error handler, you
must disable the Windows error handler as well as enable the front panel error
handler. Go to the Windows PostScript tab and uncheck the box Print PS Error
Info.
Windows NT does not have an error handler.
Windows 95/Windows 98 Tek Adobe Driver uses the printer error handler.
Advanced Features and Troubleshooting Manual
Troubleshooting Phaser 750 Printers
Printer Administration
<---- ----> Menu
Post Script Error Info
<---- ----> Menu
On or Off *
<---- ----> Menu
147