Panasonic FZ-G2 Series Operating Instructions Manual page 98

Password On Boot
The shutdown when the fast startup is enabled, this function is ineffective.
l
Password On Reboot
Password On Resume
Can be changed only when [Password On Boot] is set to [Enabled].
l
This function is effective when the computer is restarted after a shutdown (when
l
fast startup is enabled) and when the computer resumes from hibernation, but
not when it resumes from sleep.
Set Supervisor Password
User Password Protection
Set User Password
Can be changed only when [Set Supervisor Password] is set.
l
SW KB Support for Encryption
Profile Selection
Can be changed only when [SW KB Support for Encryption] is set to [Enabled].
l
SW KB Support for BitLocker
Storage Security Configuration (TCG)
Can be changed only when [Set Supervisor Password] is set.
l
Sub-menu items:
l
Sub-Menu Protection
l
Security Policy
l
Set Storage Password
l
Storage Security Status (Depending on the models, this item is dis-
l
played differently.)
Embedded Security (TPM)
Only for model that supports TPM.
l
Can be changed only when [Set Supervisor Password] is set.
l
Sub-menu items:
l
Sub-Menu Protection
l
TPM State (Depending on the models, this item is not displayed.)
l
Pending TPM operation
l
When [Clear TPM Owner] is selected, clear owner information in the
TPM chip.
Use for discarding and transferring this product.
If you select [Clear TPM Owner] when the BitLocker is effective, you
may need to reinstall OS.
Block SID Authentication
l
AMT Configuration
Only for model that supports Intel(R) AMT.
l
Can be changed only when [Set Supervisor Password] is set.
l
Disabled
Enabled
Disabled
Same as Boot
Disabled
Enabled
Enter the password.
No Protection
Protected
Enter the password.
Disabled
Enabled
1 field
2 fields
Disabled
Enabled
Enter the sub-menu.
Enter the sub-menu.
Enter the sub-menu.