Panasonic FZ-G2 Series Operating Instructions Manual page 110

1. Slide the cover (F) to the arrow direction.
2. Connect the USB device to the USB 3.0 (Type-A) port (G) or the USB 3.0 (Type-C) port (H) on the computer.
Removing the USB device
1. Disable the USB device.
1. Click on the task tray and click
2. Select the USB device.
These steps are not necessary when;
l
Removing the device after turning off the computer.
l
l
The device does not appear in the list in step 2.
l
2. Remove the USB device.
NOTE
You may need to install the driver for the USB device. Follow the on-screen instructions or refer to the instruction manual
l
of the USB device.
You may need to install the driver again when connecting the device to another port.
l
When a USB device is connected, sleep or hibernation may not function normally. If the computer does not start up nor-
l
mally, remove the USB device and restart the computer.
When the USB device is removed and then inserted while the computer is on,
l
the device may not be correctly recognized. In this case, remove and connect the device again, or restart the computer.
When a USB device is connected, power consumption increases. Remove the USB device when it is not in use, especially
l
when operating by battery power.
If the computer enters sleep while an external keyboard or external mouse is connected, touching the external keyboard
l
keys or external mouse will resume the computer.
.
is not displayed.
may appear in the Device Manager and