Panasonic FZ-G2 Series Operating Instructions Manual page 29

A. Use the slider to change the zoom ratio of the window (4 levels in 0.5x increments).
B. If you clear the checkbox, the zoom window will continue to be displayed when you tap inside the zoom window.
If you select the checkbox, the zoom window will close when you tap inside the zoom window.
C. If you select the [Display Operation Guides] checkbox and click [OK] to close the window, operation guides will appear the next time you
perform a two-finger tap after signing in.
D. Click this to restore changed values to default settings.
4. Click [OK].
This completes settings adjustment.
NOTE
Specifying a zoom ratio other than 2.0x or 3.0x may cause text in the zoom window to appear unclear.
n
When the setting window is displayed, the zoom window will not be displayed.
n
Disabling "Touch Operation Support"
1. Click
(Start) -
2. To disable "Touch Operation Support", remove a checkmark to [Support touch operation].
(Panasonic PC Settings Utility) - (Settings) - (Touch Screen).