Panasonic FZ-G2 Series Operating Instructions Manual page 174

5. Press ≪ F2≫ or ≪ Del≫ while "Panasonic" boot screen is displayed.
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
l
NOTE
For the tablet only, touch the top left corner of the screen or press the
l
screen is displayed.
6. Select the [Exit] menu, and then select the commercially available optical drive or USB storage device in [Boot Override] and
press ≪ Enter≫ .
The computer will restart.
7. Click [Erase].
8. Click [Erase the all data on the whole Disk.].
9. Click [Start Erase Process.].
Erasing the flash memory drive data starts.
10. After the erasing is completed, remove the Recovery Disc and click [Shutdown.].
button while "Panasonic" boot