Panasonic FZ-G2 Series Operating Instructions Manual page 155

[Enter Password] does not appear when
resuming from sleep/hibernation.
Cannot sign in to Windows using the face
recognition for Windows Hello outdoors.
Display
No display.
The screen is dark.
The screen is disordered.
Select [Enabled] in [Password On Resume]
l
The Windows password can be used instead of the password set in the Setup Utility.
l
To add a password, set up the following.
1. Click
(Start) -
2. Click [Password] - [Add].
3. Create a password.
4. Click [Next].
5. Click [Finish].
6. Select [Every Time] under "Require sign-in".
If you have registered the face recognition indoors, you may not sign in to Windows using the
l
face recognition outdoors. In such cases, please add Windows Hello face recognition outdoors.
Perform the following procedure.
1. Sign in to Windows.
2. Click (Start) -
3. Click [Windows Hello Face] - [Improve recognition].
4. When the "Windows Hello setup" screen is displayed, click [Get started].
5. "Making sure it's you" is displayed, input PIN number.
6. Since additional registration of face recognition starts, follow the on-screen instruc-
tions.
If you cannot register the face recognition outdoors properly, try to take the following measures.
l
In the shade, register your face with your back against the wall that does not reflect the
l
light.
Place the tablet vertically to block the sunlight, and register your face.
l
The external display is selected. Press ≪ Fn≫ + ≪ F3≫ or ≪
l
display. Then click the display mode.
When using an external display,
l
Check the cable connection.
l
Turn on the display.
l
Check the settings of external display.
l
The display is turned off by the power-saving function. The screen returns to the original state
l
when you operate keyboard, touchpad, or touchscreen. When operating the keyboard, press a
key that does not affect the computer operation, such as ≪ Ctrl≫ .
The computer entered sleep or hibernation by the power-saving function. To resume, press the
l
power switch.
The screen is darker when the AC adaptor is not connected. Press ≪ Fn≫ + ≪ F2≫ and
l
adjust the brightness. As you increase the brightness, battery consumption increases.
Press ≪ Fn≫ + ≪ F8≫ or
l
Under factory default settings, the brightness of the display screen will adjust automatically
l
based on the ambient light detected by the ambient light sensor. You can adjust the settings for
this sensor. ( About the Ambient Light
Changing the number of display colors and resolution may affect the screen. Restart the com-
l
puter.
Connecting/disconnecting an external display may affect the screen. Restart the computer.
l
Resuming from sleep or hibernation may affect the screen of the external display. Restart the
l
computer.
in the [Security] menu of the Setup Utility.
(Settings) - [Accounts] - [Sign-in options].
(Settings) - [Accounts] - [Sign-in options].
button to turn off the concealed mode.
Sensor)
≫ + ≪ P≫ to switch the