Panasonic FZ-G2 Series Operating Instructions Manual page 6

Rear Expansion Bay
You can select from the following options.
FZ-VSCG211 FZ-VRFG211
Smart Card Reader HF RFID Reader
Inserting an option to the rear expansion bay
1. Turn off the computer and disconnect the AC adaptor.
I M P ORTANT
We recommend that you turn off the computer completely the following.
l
1. Click
2. Click [Restart now] under "Advanced startup".
3. Click [Turn off your PC].
2. <For tablet> Turn your computer over.
Make sure no foreign objects are under the computer.
3. Remove the battery pack. (
4. Insert an option to the rear expansion bay.
1. <Only for standard model> Remove the screw (A).
Use the PH 0 (PH #0) screwdriver.
For the appearance of the standard model, refer to
2. If the dummy pack is inserted, remove it.
While sliding the rear expansion bay latch (B), remove the dummy pack.
3. Insert the projection part (C) of the option into (D) part, and attach it while lowering until it clicks into place.
(Start) - (Settings) - [Update & Security] - [Recovery].
Replacing the Battery Pack)
"Description of Parts".