Panasonic FZ-G2 Series Operating Instructions Manual page 134

Cradle (FZ-VEBG11AU)
You can use an optional cradle. This device frees you from being bothered by a lot of cable connections when you carry the FZ-G2 series (tablet). It also
allows you to connect various peripherals.
Connect the cradle to the expansion bus connector (A) on the bottom side of the tablet.
For further information, refer to the instruction manual of the cradle.
In combination of the computer and cradle, you can connect variety of devices.
Read operating instructions for each device carefully when connecting each device to the cradle.
Names and Functions of Parts
l
Connecting/Disconnecting the Tablet
l
Names and Functions of Parts
I M P ORTANT
Do not touch the expansion bus connector or pins of the cradle.
l
<Rear>
A. DC-IN Jack
B. LAN Port
C. USB 3.0 Ports (2 ports)
D. HDMI Port
Connector for HDMI compatible digital display.
It is not compatible with the analog display.
l
The display specifications of the maximum resolution, etc. that can be output differ according to the specifications of the device con-
l
nected. For details, refer to the specifications of the device connected.
E. VGA Port
F. Serial Port
G. Security Slot
A Kensington cable can be connected.
For more information, read the manual that comes with the cable.
l
<Front>