Panasonic FZ-G2 Series Operating Instructions Manual page 132

Refer to the OPERATING INSTRUCTIONS accompanying computer for information on proper handling of the AC
l
adaptor and AC cord.
3. Set the front corners of the computer in the latches of the port replicator.
Confirm to close all connector covers of computer before connecting. Do not attempt to make connections if there is any object between
l
the computer and the port replicator. Doing so could damage the computer and the port replicator.
4. Press the computer in the direction of the arrow and set firmly against the port replicator.
I M P ORTANT
Do not allow your hand to get caught between the computer and the port replicator when setting the computer.
l
I M P ORTANT
Do not attempt to move the port replicator while the computer is being connected to the port replicator.
l
If the computer malfunctions while the port replicator is attached, disconnect the port replicator and check to see if the
l
computer operates normally. If the computer operates normally, the port replicator may be malfunctioning. Contact
Panasonic Technical Support.
NOTE
See other chapters in this manual for connecting and setting USB devices, external displays and LAN.
l