Panasonic FZ-G2 Series Operating Instructions Manual page 159

<Only for model with Serial Port>
The device connected to the serial port
does not work.
<Only for model with dedicated GPS / GPS
on wireless WAN>
GPS does not work.
<Only for model with wireless LAN>
Wireless LAN does not work.
<Only for model with Bluetooth>
Bluetooth does not work.
<Only for model with LAN>
LAN transmission speed slows down
noticeably.
<Only for model with wireless LAN>
Wireless LAN connection is cut.
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For example,
[Flight mode]/[WiFi] may be displayed instead of [Airplane mode]/[Wi-Fi] in some language preference.)
Check the connection.
l
The device driver may not work. Refer to the instruction manual of the device.
l
Set [Serial Port] to [Auto] in the sub-menu of [Serial Port Settings] in the [Advanced] menu of the
l
Setup Utility.
The I/O and IRQ you can use vary depending on the device. If the setting does not work, try
l
other settings in the Setup Utility.
You can check the GPS status. (
l
Set airplane mode to OFF.
l
*1
Airplane mode
l
Confirm that Wireless LAN (Wi-Fi) is [On].
l
Confirm that Wireless WAN (Cellular) is [On].
l
If a USB 3.0 compatible device is used, GPS information may not be correctly received. In this
l
case, do any of the following.
Set [Right Port of Tablet]
l
[Advanced] menu of the Setup Utility.
Connect the USB device to the USB 2.0 port.
l
Use an extension cable (separately sold) compatible with USB 2.0.
l
If an external antenna for GPS can be used, use the external antenna, and keep some
l
distance between the external antenna and the USB device.
You can check the Wireless LAN status. (
l
Set airplane mode to OFF.
l
*1
Airplane mode
l
Confirm that Wireless LAN (Wi-Fi) is [On].
l
Confirm that Wireless WAN (Cellular) is [On].
l
If a USB 3.0 compatible device is used, Wireless LAN Antenna may not be correctly received. In
l
this case, do any of the following.
Set [Keyboard Base and Cradle]
l
ity.
Connect the USB device to the USB 2.0 port.
l
Use an extension cable (separately sold) compatible with USB 2.0.
l
You can check the Bluetooth status. (
l
Set airplane mode to OFF.
l
*1
Airplane mode
l
Confirm that Wireless LAN (Wi-Fi) is [On].
l
Confirm that Wireless WAN (Cellular) is [On].
l
If a USB 3.0 compatible device is used, Bluetooth Antenna may not be correctly received. In this
l
case, do any of the following.
Set [Keyboard Base and Cradle]
l
ity.
Connect the USB device to the USB 2.0 port.
l
Use an extension cable (separately sold) compatible with USB 2.0.
l
Change the power plan to [Best performance]. (
l
GPS)
or [Keyboard Base and Cradle]
Wireless LAN)
to [Disabled] in the [Advanced] menu of the Setup Util-
Bluetooth)
to [Disabled] in the [Advanced] menu of the Setup Util-
Configuring Power Saving
to [Disabled] in the
Settings)