Panasonic FZ-G2 Series Operating Instructions Manual page 54

Set the password beforehand. (
l
1. Sign in to Windows as an administrator.
2. Click
(Start) -
3. Click [Accounts] - [Sign-in options].
4. Select the item under "Require sign-in".
When [Windows Hello Face] is set, this is fixed to [Every Time].
l
Ignition Mode (Power On AC)
You can turn on the computer by connecting the AC adaptor.
1. Click
(Start) -
2. Click [Restart now] under "Advanced startup".
3. Click [Troubleshoot] - [Advanced options] - [UEFI Firmware Settings] - [Restart].
The computer restarts, and the Setup Utility screen appears.
4. Set [Power On AC] to [Enabled] in the [Main] menu.
5. Press ≪ F10≫ , select [Yes], and press ≪ Enter≫ .
Modern Standby
The sleep mode of this computer supports the modern standby mode. The modern standby mode enables applications to receive communication pack-
ets periodically even in the sleep state and also enable to resume from the low power state. Also, resume performance in modern standby mode is faster.
Accordingly, more power is consumed in modern standby mode than in the conventional sleep function. When the computer is driven by the battery, it is
recommended to switch the network connection as necessary.
Setting the modern standby mode in battery-driven state
1. Click (Start) -
2. Click app that you want to change the setting, under "Battery usage per app".
3. Select setting under "Choose when this app can run in the background:".
[Always]: Always enabled in the background.
[Let Windows decide]: Disabled when the computer is driven by the battery.
[Never]: Disabled in the background.
NOTE
To connect to the network in the sleep state, the application you are using needs to support the modern standby mode.
l
Check with the application provider whether or not the application supports the modern standby mode.
When resuming from modern standby (sleep), press the power switch.
l
Even if the computer moves to the modern standby (sleep) state automatically or manually, depending on the OS state or
l
application specifications, the application operation may continue with the display turned off.
Unsaved data will be lost if the power supply is cut by removing both the battery pack and AC adaptor in the modern
l
standby (sleep) state.
Setting the Windows
(Settings).
(Settings) - [Update & Security] - [Recovery].
(Settings) - [System] - [Battery].
Password)