Panasonic FZ-G2 Series Operating Instructions Manual page 52

Using ≪ Fn≫ + ≪ F7≫
If you press ≪ Fn≫ + ≪ F7≫ , the computer enters sleep.
( Key Combinations)
Using Windows functions
You can enter sleep or hibernation using Windows functions.
1. Click (Start) -
2. Click [Sleep] or [Hibernate].
NOTE
Hibernation from the Windows system menu is not available as the factory default. To enter hibernation from the Windows
l
system menu, the following setting is necessary.
1. Click
(Start) -
2. Click [Additional power settings] under "Related settings".
3. Click [Choose what the power buttons do] - [Change settings that are currently unavailable].
4. Add check mark for [Hibernate] and click [Save changes].
I M P ORTANT
While the computer is entering hibernation
Do not:
l
Touch the keyboard, touchpad, touchscreen, tablet buttons, or power switch.
l
Use an external mouse or other peripheral devices.
l
Connect or disconnect the AC adaptor.
l
Close or open the display.
l
Wait until the power indicator blinks green (sleep) or goes off (hibernation).
It may take 1 or 2 minutes to enter sleep or hibernation. Do not touch any key though the screen becomes dark.
l
After releasing the power switch, do not operate it until the power indicator blinks or goes off.
l
(Power).
(Settings) - [System] - [Power & sleep].