Panasonic FZ-G2 Series Operating Instructions Manual page 74

6. Click [OK].
Internet connection will be possible.
7. If you are not connected to the Internet, select created APN profile, and then click [Apply].
NOTE
When "Use cellular instead of Wi-Fi" is set to [When Wi-Fi is poor] (default), wireless WAN connections will be established
l
only when there is no Internet connection via Wi-Fi.
When using wireless WAN, perform the following to disable Airplane mode
l
1. Click (Start) -
2. Set "Airplane mode"
3. Set "Cellular" to [On].
*1: Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages.
For example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference.)
Disconnecting to a network
1. Click (Start) -
2. Click [Disconnect].
NOTE
(Settings) - [Network & Internet] - [Airplane mode]
*1
to [Off].
(Settings) - [Network & Internet] - [Cellular].
*1
.
*1
.