Panasonic FZ-G2 Series Operating Instructions Manual page 136

3. Insert the tablet to the cradle from above.
4. Push the tablet to the back.
Do not attempt to make connections if there is any object between the tablet and the cradle. Doing so could damage the tablet and the
l
cradle.
I M P ORTANT
Push the tablet into the back of the roller as shown in the illustration below when connecting it to the cradle.
l
Do not attempt to move the cradle while the tablet is being connected to the cradle.
l
When connecting USB devices to the tablet connected to the cradle, make sure that the tablet does not come off the
l
cradle.
If the computer malfunctions while the cradle is attached, disconnect the cradle and check to see if the computer operates
l
normally. If the computer operates normally, the cradle may be malfunctioning. Contact Panasonic Technical Support.
NOTE
If the image of the external display connected to the cradle has stopped, remove the tablet from the cradle, and then
l
reconnect it.
Disconnecting
1. Turn off the tablet.
2. Pull the tablet to the front.