Panasonic FZ-G2 Series Operating Instructions Manual page 27

You can perform the following touch operations in the zoom window.
Tap (Left Click)
n
Double Tap (Left Double Click)
n
Press and Hold (Right Click)
n
Tap on the popup menu to be displayed after right click
n
Drag (Drag by Left Button)
n
Drag after Press and Hold (Drag by Right Button)
n
Drag from inside to inside of the zoom window
n
Drag from inside to outside of the zoom window
n
Drag from outside to inside of the zoom window
n
Drag from outside to outside of the zoom window
n
Operation guides may appear when using the zoom window for the first time. These guides will not appear again if you select the [Do not show this again]
checkbox and tap [OK].
NOTE
If two points that will result in a zoom window size that is larger than the resolution of the screen are tapped, the zoom win-
n
dow will be adjusted to fit the screen.
Even if you use a two-finger tap gesture on a small rectangular area, the zoom window cannot be displayed in a size smal-
n
ler than the predetermined minimum size.
The zoom window may not appear if you perform a two-finger tap on a window's title bar or edges or on an unfixed
n
taskbar.
The zoom window may also appear when you tap using three fingers.
n
If a button for another application, for example, exists within the area of the two-finger tap, the button may be activated in
n
addition to the zoom window opening in some cases.
You can also use mouse and perform operation inside the zoom window. In that case, the displayed area in the zoom win-
n
dow follows mouse cursor movement.
Closing the zoom window
1. Tap outside the zoom window.
The zoom window closes.
NOTE
If you are displaying the edge of the screen in the zoom window and you tap the edge of the screen outside the zoom win-
n
dow, an operation identical to that inside the zoom window may be performed and the zoom window may not close in
some cases.
The zoom window automatically closes when:
n
You disable the utility in the task tray menu
l
You rotate the screen
l
You change the resolution
l
Computer enters into the hibernation mode
l
The screen is locked
l