Corrective maintenance
10.2 Downloading the converter settings
You have transferred the settings to the converter.
❒
10.2.1.5
Download from IOP-2 operator panel
Overview
You can transfer the converter settings that are backed up on the IOP-2 operator panel back into
the converter.
Precondition
The following requirements apply:
• The converter power supply has been switched on.
• The converter settings are not protected against copying.
Function description
Procedure
1. Connect the operator panel to the converter.
2. Start the download.
3. Wait until the download is completed.
386
Download with active know-how protection with copy protection (Page 401)
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
SINAMICS G120C Converters