Siemens SINAMICS G120C Operating Instructions Manual page 57

Mounting on a standard mounting rail (TS 35)
Procedure
1. Mount the converter on the top edge of the mounting rail.
2. Using a screwdriver, actuate the release button on the upper side of the converter.
3. Continue to actuate the release button until the converter audibly snaps onto the mounting
rail.
Figure 4-17
You have mounted the converter on the mounting rail.
❒
To remove, actuate the release button and at the same time withdraw the converter from the
mounting rail.
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
Mounting on a standard mounting rail
4.4 Mounting the converter
You can mount converters, frame
size FSAA on a TS 35 standard mount‐
ing rail.
Installing
55