Siemens SINAMICS G120C Operating Instructions Manual page 116

Installing
4.10 Connecting the interfaces for the converter control
Setting the telegram
Set the same telegram in the converter as in the PROFIBUS master. Interconnect the telegrams
in the control program of the PROFIBUS master with the signals of your choosing.
Application examples
You can find application examples for PROFIBUS communication on the Internet:
via PROFINET or PROFIBUS, with Safety Integrated (via terminal) and HMI
support.industry.siemens.com/cs/ww/en/view/60441457)
(TO) via PROFINET or PROFIBUS, with Safety Integrated (via terminal) and HMI
support.industry.siemens.com/cs/ww/en/view/78788716)
114
Drive control via PROFIBUS or PROFINET (Page 211)
Controlling the speed of a SINAMICS G110M/G120/G120C/G120D with S7-300/400F
Controlling the speed of a SINAMICS G110M / G120 (Startdrive) with S7-1500
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
(https://
(https://
SINAMICS G120C Converters