Manual Downloading From The Memory Card With The Bop-2 - Siemens SINAMICS G120C Operating Instructions Manual
Low voltage converters
Hide thumbs
Also See for SINAMICS G120C:
- Operating instructions manual (470 pages) ,
- Compact operating instructions (92 pages) ,
- Getting started (68 pages)
Table of Contents
Advertisement
10.2.1.2
Manual downloading from the memory card with the BOP-2
Overview
If you have backed up the settings of several converters on the memory card, the settings
download must be started manually.
Precondition
The following requirements apply:
• The converter power supply has been switched on.
• The converter settings are not protected against copying.
Function description
Procedure
1. Insert the memory card into the converter.
2. Select the download.
3. Set the number of your data backup. You can back up 99 different settings on the memory
card.
4. Start the data transfer.
5. Wait until the converter has transferred the settings from the memory card.
6. Back up the settings so that they are protected against power failure.
You have transferred the settings from the memory card to the converter.
❒
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
Download with active know-how protection with copy protection (Page 401)
Corrective maintenance
10.2 Downloading the converter settings
383
Advertisement
Table of Contents
