Siemens SINAMICS G120C Operating Instructions Manual page 100

Installing
4.10 Connecting the interfaces for the converter control
Default setting 15: "Process industry"
DO 0: p0730, DO 1:
p0731
Motorized potentiometer setpoint after ramp-function generator: r1050
Speed setpoint (main setpoint): p1070[0] = 755[0], p1070[1] = 1050
Designation in the BOP-2: Proc
Default setting 17: "2-wire (forw/backw1)"
DO 0: p0730, DO 1:
p0731
Speed setpoint (main setpoint): p1070[0] = 755[0]
Designation in the BOP-2: 2-wIrE 1
98
AO 0: p0771[0] DI 0: r0722.0, ..., DI 5: r0722.5
AO 0: p0771[0] DI 0: r0722.0, ..., DI 2: r0722.2
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
AI 0: r0755[0]
AI 0: r0755[0]
SINAMICS G120C Converters