Siemens SINAMICS G120C Operating Instructions Manual page 131

Rated motor voltage
Rated motor current
Rated motor power
Rated motor frequency
Rated motor speed
Motor cooling:
•
•
•
•
Select the basic setting for the motor control:
•
•
Select the default setting for the interfaces of the converter that is suitable for your
application.
Figure 5-5
Figure 5-6
Ramp-down time after the OFF3 command
SINAMICS G120C Converters
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
: Natural cooling
: Forced-air cooling
: Liquid cooling
: Without fan
: Constant load
: Speed-dependent load
Default setting of the interfaces (Page 92)
Minimum and maximum motor speed
Ramp-up and ramp-down time of the motor
5.4 Quick commissioning using the BOP-2 operator panel
Commissioning
129