Installing
4.3 Mounting base components
Figure 4-10
Mounting
Mounting of the base components:
• 4 × M4 screws
• 4 × M4 nuts
• 4 × M4 washers
Tightening torque: 5 Nm
Mounting frame size FSAA on a base component
Figure 4-11
Reactors, filters and braking resistors are available as base components for converters, frame
size FSAA.
Mount the converter using two M4 screws on the base component.
48
Braking resistor
Available base components
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
SINAMICS G120C Converters