Corrective maintenance
10.2 Downloading the converter settings
Requirement
The following preconditions apply:
• The PC and converter are connected with one another.
• The converter settings are not protected against copying.
Function description
Procedure
1. Open the Startdrive project that matches the drive.
2. Select "Load to device".
3. Confirm the prompt for saving your settings (copy RAM to ROM).
You transferred the settings from the PC to the new converter.
❒
10.2.2
Converter with enabled safety functions
10.2.2.1
Automatic download from the memory card
Overview
We recommend that you insert the memory card before switching on the converter. The
converter automatically imports its settings from the inserted memory card.
Requirement
The following preconditions apply:
• The converter power supply has been switched off.
• The converter settings are not protected against copying.
Function description
Procedure
1. Insert the memory card into the converter.
2. Switch on the power supply for the converter.
390
Download with active know-how protection with copy protection (Page 401)
Download with active know-how protection with copy protection (Page 401)
Operating Instructions, 02/2023, FW V4.7 SP14, A5E34263257B AK
SINAMICS G120C Converters