Spare Parts, Accessories - 3M PELTOR LiteCom Plus MT7H7 4410-EU Series Manual

GB
6.2 Cleaning
Remove the cushions (E:5) and foam liners (E:6) if you have been wearing the hearing protector for a long time or if
moisture has gathered inside the cups. Clean and disinfect the cups, headband and cushions regularly with soap and
warm water. Make sure the soap is known not to be harmful to the wearer. Allow the hearing protector to dry before you
use it again.
NOTE! Do not immerse the hearing protector in water!
SPARE PARTS/ACCESSORIES
3M™ PELTOR™ HY79 Hygiene kit
Replaceable hygiene kit consisting of two attenuation cushions, two foam rings and two snap-in ear cushions. Replace at
least twice a year to ensure constant attenuation, hygiene and comfort.
3M™ PELTOR™ HY100A Single-use protectors
A single-use protector that is easy to fit to the ear cushions. Pack of 100 pairs.
3M™ PELTOR™ HYM1000 Microphone protector
Moisture-resistant and wind-resistant hygienic tape that protects the speech microphone and extends its life at the same
time. Pack of 5 metres is sufficient for around 50 replacements.
3M™ PELTOR™ MT7N-02 Dynamic microphone
Supplied as standard with product.
3M™ PELTOR™ M42/1 Wind shield for dynamic microphone
3M™ PELTOR™ ACK081 Battery
Supplied as standard with product.
3M™ PELTOR™ AL2AI Charging cable
USB cable connecting to ACK081.
3M™ PELTOR™ FR08 Power supply
Power supply for AL2AI/ACK081.
3M™ PELTOR™ FL5602 External PTT
Push-To-Talk button with connection cable for external control of transmission with the built-in communication radio.
3M™ PELTOR™ M60/2 Wind protection for microphones with level dependent function for ambient listening
Effective against wind noise; enhances life span and protects the microphones. One pair per pack.
3M™ PELTOR™ FL6CS Connecting cable
With 2.5 mm stereo connector for use with DECT and mobile telephones.
3M™ PELTOR™ FL6CT Connecting cable
Listening cable with a 3.5 mm mono connector for external equipment (e.g. communicatio radio).
3M™ PELTOR™ FL6BS Connecting cable
Listening cable with a 2.5 mm mono connector for external equipment (e.g. communicatio radio).
3M™ PELTOR™ FL6BR Connecting cable
With PELTOR J11 connector (type Nexus TP-120) for use with a PELTOR adapter and an external communication radio.
3M™ PELTOR™ MT90-02 Throat microphone
Dynamic laryngophone.
15