3M PELTOR LiteCom Plus MT7H7 4410-EU Series Manual page 13

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
GB
(N) CTCSS (Continuous Tone Coded Squelch System)
1. 67.0
8. 88.5
2. 71.9
9. 91.5
3. 74.4
10. 94.8
4. 77.0
11. 97.4
5. 79.7
12. 100.0
6. 82.5
13. 103.5
7. 85.4
14. 107.2
(O) DCS (Digital Coded Squelch)
39. 023
53. 114
67. 174
40. 025
54. 115
68. 205
41. 026
55. 116
69. 223
42. 031
56. 125
70. 226
43. 032
57. 131
71. 243
44. 043
58. 132
72. 244
45. 047
59. 134
73. 245
46. 051
60. 143
74. 251
47. 054
61. 152
75. 261
48. 065
62. 155
76. 263
49. 071
63. 156
77. 265
50. 072
64. 162
78. 271
51. 073
65. 165
79. 306
52. 074
66. 172
80. 311
5.2.3 Power (radio transmitted output)
There are two output power levels, high and low. Use as low output as possible to maximise the run time.
Press the + button (E:11) or – button (E:12) to set the level. Each change is confirmed by a voice message.
5.3 Set up menu (configuration menu)
The configuration menu gives access to more advanced settings for the headset. This menu is accessed in power off mode
by pressing the PTT auxiliary button (E:16) and the On/Off/Mode button (E:10) at the same time. To exit the set up menu
press and hold the On/Off/Mode button (E:10) for 2 seconds and the headset will be turned off.
5.3.1 BCLO (Busy channel lockout)
This menu setting let you change the way the headset reacts when you try to transmit on a busy channel.
There are two options to choose from: "carrier" and "sub channel" (code) with or without a warning tone. If you want the
headset to respond to the carrier wave, select the "carrier" option; if you want it to react to the sub channel, choose the
"sub channel" option. Press the + button (E:11) or – button (E:12) to select the BCLO setting. Each change is confirmed by
a voice message.
5.3.2 Max transmission time
This function lets you adjust the maximum transmission time. The time can be chosen between 30 seconds up to 5
minutes and off-mode. Press the + button (E:11) or – button (E:12) to adjust the maximum transmission time. Each change
is confirmed by a voice message
13
15. 110.9
22. 141.3
16. 114.8
23. 146.2
17. 118.8
24. 151.4
18. 123.0
25. 156.7
19. 127.3
26. 162.2
20. 131.8
27. 167.9
21. 136.5
28. 173.8
81. 315
95. 445
109. 631
82. 331
96. 464
110. 632
83. 343
97. 465
111. 654
84. 346
98. 466
112. 662
85. 351
99. 503
113. 664
86. 364
100. 506
114. 703
87. 365
101. 516
115. 712
88. 371
102. 532
116. 723
89. 411
103. 546
117. 731
90. 412
104. 565
118. 732
91. 413
105. 606
119. 734
92. 423
106. 612
120. 743
93. 431
107. 624
121. 754
94. 432
108. 627
29. 179.9
36. 233.6
30. 186.2
37. 241.8
31. 192.8
38. 250.3
32. 203.5
33. 210.7
34. 218.1
35. 225.7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Peltor litecom plus mt7h7 4310-eu series

Table of Contents